Table of Contents
Advertisement
5.8 Paper Feed Specifications
.8.1 Paper feed methods/Paths
a
Friction feed
b
Friction feed
c
Push tractor feed (Front path) For Sprocket paper (Tractor)
.8. Paper Positioning Restrictions
6.35mm (0.25")
18mm (0.7")
1
Cut-sheet paper (slip)
2
Roll paper
3
Sprocket paper (Tractor)
4
Printing position on the first line
5
Printing position on the last line
6
Cut-sheet paper (Counterfoil, Stub)
.8. Paper Tear-off
Roll paper
The paper can be torn off 41.69mm (1.64 inch) above the first printed line. A sharp serrated edge
is provided on the top cover for paper tear-off.
Sprocket paper (Tractor)
The paper can be torn off 35.96mm (1.42 inch) above the first printed line. A sharp serrated edge
is provided on the access cover for paper tear-off.
.8.4 Paper End Detection
1
With cut-sheet paper feed, the paper end is detected when the remaining paper length is about
19.6mm (0.77 inch) from the last printed line.
2
With roll paper feed, the paper end is detected when the remaining paper length is about
87.83mm (3.46 inch) from the last printed line.
3
With Sprocket paper (Tractor) feed, the paper end is detected when the remaining paper length is
about 19.6mm (0.77 inch) from the last printed line.
4
Upon detecting the paper end, the printer stops printing and sends a paper end signal to the
interface.
|
78
OKIPOS 426S
For Cut-sheet paper
For Roll paper
1
41.69mm (1.64")
4
6
5
2
10.31mm (0.41")
3
Advertisement
Table of Contents
