Panel Overview; Front Panel; Rear Panel - AMX DCP-SRX User Manual

4. PANEL OVERVIEW

4.1 Front Panel

1 2 3
Item Name
1 ID LED
2 POWER LED
3 USB connector

4.2 Rear Panel

1 2
Item Name
1 HDBT IN
2 RS232
3 ETHERNET
4 HDMI OUT
5 AUDIO OUT
6 SCALER switch
7 HDBT OUT
8 RESET button
9 DC 12V
8
Description
Indicates the device to be controlled. The LED will flash
when the ID button in the Web UI (Configure > Device) is
turned ON.
Illuminates when the device is powered on.
Accepts a flash driver for Scaler updating.
3
Description
Connect to HDBT OUT of any HDBT transmitter or DCP-MTX
or another DCP-SRX.
Connects to a controllable device, e.g. projector, for RS232
pass-through control.
Connects to a LAN device, e.g. IP-based touch panel for LAN
control.
Connects to an HDMI display device.
Connects to an audio system, e.g. amplifier.
Uses a DIP switch for adjust output scaling.
Connects to HDBT IN of any HDBT device or DCP-MTX.
Resets the device to factory default.
Connects to the power adapter provided.
4 5 6 7 8 9
USER MANUAL
DCP-SRX