Beko 670520 EB User Manual page 24

Using the product
1. Economic use
This sign will light up when the freezer
compartment is set to -18°C', the most
economical setting. (
indicator will turn off when rapid cooling or
rapid freezing function is selected.
2. High temperature / fault alert
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you
see this indicator is lit up, please see the
"recommended solutions for problems" section
in this guide.
This indicator illuminates during power failure,
high temperature failures and error warnings.
During sustained power failures, the highest
temperature that the freezer compartment
reaches will flash on the digital display. After
checking the food located in the freezer
compartment press the alarm off button to
clear the warning.
Please refer to "remedies advised for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
3. Energy saving function (display off)
If the product doors are kept closed for a long
time energy saving function is automatically
activated and energy saving symbol is
illuminated. When energy saving function is
activated, all symbols on the display other
than energy saving symbol will turn off. When
the Energy Saving function is activated, if
any button is pressed or the door is opened,
energy saving function will be canceled and the
symbols on display will return to normal.
Energy saving function is activated during
delivery from factory and cannot be canceled.
) Economic use
22 /36EN
4. Rapid cooling
When the rapid cooling function is turned on, the
rapid cool indicator will light up (
oler compartment temperature indicator will disp-
lay the value 1. Push the Rapid cool button again
to cancel this function. The Rapid cool indicator will
turn off and return to normal setting. The rapid co-
oling function will be automatically cancelled after
1 hour, unless cancelled by the user. Too cool a lar-
ge amount of fresh food, press the rapid cool but-
ton before placing the food in the cooler compart-
ment.
5. Vacation function
To activate the Vacation function, press the
button for ( ) 3 seconds; this will activate
the vacation mode indicator (
the Vacation function is active, the cooler
compartment temperature indicator displays
the inscription "- -" and no cooling process
will be active in the cooling compartment. This
function is not suitable to keep food in the
cooler compartment. Other compartments will
remain cooled with the respective temperature
set for each compartment.
Push the vacation function button again to
cancel this function
6. Cooler compartment temperature set-
ting
After pressing the button, the cooler
compartment temperature can be set to
8,7,6,5,4,3,2 and 1 respectively. ( )
) and the co-
). When
Refrigerator / User Guide