Description Of The Front-Panel; Ethernet Port (Eth0 To Eth8) - Wieland wienetUMS 8-4POE-W User Manual

5.6

Description of the Front-Panel

On the front panel some LEDs can be found which indicate the power and network status.
LED Definition
LED Color
P1 Green
P2 Green
P-Fail Red
PoE (1~4) Green
Link / Active Green
(1~8)
Duplex / Yellow
Collision
(1~8)
5.6.1

Ethernet Port (ETH0 to ETH8)

Panel socket RJ45. It is suggested to adopt ELA/TIA as the wiring of the RJ-45.
Pin Signal
mark
1 TXD+
2 TXD-
3 RXD+
4 DC+
5 DC+
6 RXD-
7 DC-
8 DC-
Wieland Electric GmbH | BA001106 (Rev. A) | 01/2017
Description
On Power input 1 is active
Off Power input 1 is inactive
On Power input 2 is active
Off Power input 2 is inactive
On Power input 1 or 2 is inactive
Off Power input 1 and 2 are active or
no power input
On A device is connected utilizing
Power over Ethernet on the corre-
sponding port
Off No device attached or power over
Ethernet function failed
On Connected to network
Flash- Networking is active
ing
Off Not connected to network
On Ethernet port full duplex
Flash- Collision of packets occurs
ing
Off Ethernet port half duplex or not
connected to network
Description
Transmit Data – positive pole
Transmit Data – negative pole
Receive Data – positive pole
POE power + (if POE is
equipped)
POE power + (if POE is
equipped)
Receive Data – negative pole
POE power - (if POE is equipped)
POE power - (if POE is equipped)
5 | Switch Design
Frontpanel
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output
11