Electrolux EOC5400AOX User Manual page 26

26 www.electrolux.com
Problem
The lamp does not oper‐
ate.
It takes too long to cook
the dishes or they cook too
quickly.
Steam and condensation
settle on the food and in
the cavity of the oven.
The display shows "C3".
The display shows "F102". • You did not fully close
The display shows an error
code that is not in this ta‐
ble.
Possible cause
The lamp is defective.
The temperature is too low
or too high.
You left the dish in the
oven for too long.
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
Remedy
Replace the lamp.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.