■
Jam protection function (driver's window only)
If an object becomes caught between the window and the window frame,
window travel is stopped and the window is opened slightly.
■
When the power window does not close normally (driver's window
only)
If the jam protection function is operating abnormally and a window cannot
be closed, perform the following operations using the power window switch
on the driver's door.
●
After stopping the vehicle, the window can be closed by holding the
power window switch in the one-touch closing position while the
"POWER" switch is turned to ON mode.
●
If the window still cannot be closed even by carrying out the operation
explained above, initialize the function by performing the following proce-
dure.
Hold the power window switch in the one-touch closing position.
STEP
1
Continue holding the switch for a further 6 seconds after the win-
dow has closed.
STEP
2
Hold the power window switch in the one-touch opening position.
Continue holding the switch for a further 2 seconds after the win-
dow has opened completely.
STEP
3
Hold the power window switch in the one-touch closing position
once again. Continue holding the switch for a further 2 seconds
after the window has closed.
If you release the switch while the window is moving, start again from the
beginning.
If the window continues to close but then re-open slightly even after perform-
ing the above procedure correctly, have the vehicle inspected by your Toyota
dealer.
1-5. Opening and closing the windows
1
83