Table of Contents
Advertisement
1-8. Safety information
Installing child restraints using a seat belt (Locking clip requiring belt)
Rear-facing Baby seat (infant seat)/child seat (convertible
■
seat)
STEP
1
STEP
2
STEP
3
118
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
Advertisement
Table of Contents
