Sony XCG-V60E Technical Manual page 25

UserSet15
Address
0xA0006F00 AcquisitionFrameRateAbs
0xA0006F04 AcquisitionFrameRateAuto
0xA0008F44 TriggerMode
0xA0008F98 TriggerSource
0xA0008F50 TriggerInhibit
0xA0008F48 TriggerActivation
0xA0008F54 TriggerOverlap
0xA0008F58 TriggerDelayRaw
0xA0008F40 ExposureTimeRaw
AnalogControl (UserSet0 to UserSet15)
UserSet0
The same applies to UserSet1 to UserSet14.
Address
0xA0008064 BinarizationThreshold
0xA0008034 DigitalEnable
1)
0xA0008008 GainRaw
0xA000800C
0xA000803C
1)
0xA0008010 GainAbs
0xA0008014
0xA000801C GainAuto
0xA0008020 GainAutoLevel
0xA0008038 BlackLevelRaw
0xA0008000
0xA0008004
0xA0008018 BlackLevelAuto
0xA0008070 LineInverter
0xA0008084
0xA000806C LineSource
0xA0008080
0xA0008090 UserOutputValue
0xA0008078 StrobeActiveTimeRaw
0xA000808C
0xA0008074 StrobeActiveDelayRaw
0xA0008088
1) Select AnalogAll, AnalogR, and DigitalAll with GainSelector.
2) Select AnalogAll, AnalogR, and DigitalAll with BlackLevelSelector.
3) Select GPI, GPO1, and GPO2 with LineSelector.
4) Select UserOutput0 and UserOutput1 with UserOutputValue.
Name Type
0.062500 ≤
R/W
R/W
R/W
R/W
R/W
R/W 0, 1, 4, 5, 6, 7
R/W
R/W 0 - 4000000
R/W 10 - 2000000
Name Type
R/W
R/W
R/W
R/W
1)
R/W
R/W
2)
R/W
2)
R/W
3)
R/W
3)
R/W
4)
R/W
3)
R/W
3)
R/W
Data
Sets the frame rate. [Fps]
0, 1 Sets the auto frame rate.
0, 1 Sets the trigger.
0, 1 Sets the trigger source.
0, 1 Sets trigger inhibit.
Sets the trigger.
0, 1 Sets the trigger overlap.
Sets the trigger delay. [ms]
Sets the exposure time. [us]
Data
0 - 4095 Sets the threshold value to use for binarization.
0, 1 Sets digital control.
0 - 502 Sets the gain (L).
Sets the gain (R).
0 - 64 Sets the digital gain.
0.0 - 18.0 Sets the gain (L) with an absolute value. [dB]
Sets the gain (R) with an absolute value. [dB]
0, 1, 2 Sets the auto gain.
0 - 16383 Sets the auto gain level.
0 - 2047 Sets the pedestal.
0 - 1023 Sets the black level (L).
Sets the black level (R).
0, 1, 2 Sets the auto black level.
0, 1 Sets the GPO inversion .
0, 1, 2 Sets the GPO signal.
0 - 1 Sets the UserOutput signal.
1 - 4000 Sets the pulse width of the Strobe1 signal. [us]
Sets the pulse width of the Strobe2 signal. [us]
0 - 4000 Sets the delay of the Strobe1 signal. [us]
Sets the delay of the Strobe2 signal. [us]
Description
Description
25