Table of Contents
Advertisement
1. Summary
Product introduction
The LED PSD-63-IP light uses casting aluminum housing, designed in a fashion of hydrodynamic
form. Appearance shows. It adopts high power 6-in-1 LED, which refers to single LED is made of
R,G,B,A,W,UV 6-IN-1 LED, And long life span, low consumption, good color mixing effect and high
brightness are the most prominent features. Each kind of LED can be independently dimmed. The
built-in program includes dimming, strobe, eotic, gradual change, fading and so on. It uses power
switch, performs low weight and consumption, stable capability and long life. International standard
DMX 512 signal is requested.
Packing List
•
PSD-63-IP ................................................................................ 1 PC
•
DMX Signal Cable .................................................................... 1 Set
•
Waterproof input power cable .................................................. 1 PC
•
User Manual
•
Warranty Card
2. Safety Instructions
Safety Notes
•
Ask a skilled technician before any repair.
•
Always make sure the power is disconnected from the source before setting up, serving and
moving.
•
Avoid direct eye exposure to the fixture when it is on.
Safety instructions
•
Make sure the power supply voltage are consistent with this lights
•
Ensure the use of voltage is in the range of the request technical parameter.
•
Before the installation, please check the light's fasteners and mechanical structure have been
received in good condition and appear no damage.
•
This light is designed for indoor use; working temperature is lower than 40 degree.
•
The fixtures maybe mounted in any position provided there is adequate room for ventilation.
Make sure there are no inflammable and explosive items (ornaments) in 0.5 meters away.
•
Yellow / green cabling earthling safety; no flicker when the fixture is working on.
3
Advertisement
Table of Contents
