Dmx Control Summary - Elan STROBE-400-LEDMINI-RGB User Manual

6. DMX Control Summary

Intensity
Flash intensity can be set from minimum (blackout) to maximum in all DMX modes except 1 channel mode
(where it is always at maximum intensity). A special pixel mode enables the fixture to be used as a blinder,
where the intensity of blinder colour can be set.
Duration
Flash duration can be set from 0 to 650 ms on 50 Hz power supplies, or 0 to 530 ms on 60 Hz power su-
pplies in 3, 4, 6 or 7 channel DMX modes. Flash duration is fixed in 1-channel DMX.
Rate
Flash rate can be set from 0 flashes per second to 25 flashes per second on 50 Hz power supplies or from
0 to 30 flashes per second on 60 Hz power supplies, when the fixture is set to 3, 4, 6 or 7 channel DMX
mode. The flash rate is also controllable in 1-channel DMX mode.
Programmed Effects
Six programmed effects are available in 4 and 7 channel DMX modes. The effects may be altered using the
inten¬sity, duration, and rate controls
7. DMX Functions and Values
1 Channel Mode
CH
1
3 Channel Mode
CH
1
2
3
4 Channel Mode
CH
1
2
3
4
6 Channel Mode
CH
1
2
6
Values
0-255
Values
0-255
0-255
0-255
Values
0-255
0-255
0-255
0-5
6-42
43-85
86-128
129-171
172-214
215-255
Values
0-255
0-255
Functions
Strobe rate(0-30HZ)
Functions
Master Dimmer (0-100%)
Flash duration(0-full on)
Strobe rate(0-30HZ)
Functions
Master Dimmer (0-100%)
Flash duration(0-full on)
Strobe rate(0-30HZ)
No effect
Ramp up effect
Ramp down effect
Ramp up-down effect
Random effect
Lightning effect
Spike effect
Functions
Master Dimmer (0-100%)
Red/Segment1-3 Dimmer(0-100%)