Table of Contents
Advertisement
For the purpose of installation and use, a minimum 5 mm space shall be preserved around
the hole. Be sure the thickness of the table surface is at least 30mm. Ensure that the benchtop
material is heat-resistant to avoid deformation caused by the heat radiation from the hotplate.
As shown in Figure (1)
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the ceramic cooker hob is in a good working state. As shown
in Figure (2)
NOTICE: The safety distance between the ceramic hob and the cupboard above the hotplate
should be at least 760mm.
600 Ceramic Hob Touch User Manual
Installation
Page 7
Hide quick links:
Advertisement
Table of Contents
