Operating Instructions - Platinum AUPL-VCR4T User Manual

Operating Instructions

MINUTE REMINDER
To set a minute reminder, press "+" or "-" on the timer menu. The timer indicator will flash "00",
then adjust length of time by pressing "+" or "-" on the timer menu. When the time is set, the
timer indicator will stop flashing after 5 seconds and countdown will start. Buzzer will sound for
30 seconds and the timer indicator will show "--" when the time has elapsed.
NOTICE: The cooking zones will not be affected by the minute reminder.
Timing cancellation - Press "+" and "-" of timer simultaneously. The timer is cancelled auto-
matically and the timer indicator shows "--".
CHILD LOCK FUNCTION
To active the child lock function, press the function. The hob then goes into lock mode, and
the timer will show "" and the rest of the keys are disabled except the ON/OFF keys. To de-active
the child lock function, hold down the for several seconds and the hob will return to normal
working mode.
POWER OF HEATING ZONES
The power of each heating zone are shown as follows:
High temperature protection - The temperature sensor mounted on the heating element
monitors the temperature inside the cooker from time to time. When an excessive temperature
is detected the heating element will stop the power output.
Residual heat warning - When the hob has been operating for some time, there will be some
residual heat. The letter "H" appears to warn you that the surface is still hot.
Auto shutdown - A safety feature of the hob is auto shutdown. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in the table below:
Default Shutdown Times
600 Ceramic Hob Touch User Manual Page 9