Attaching A Lens - FujiFilm X-H1 Owner's Manual

Attaching a Lens

The camera can be used with lenses for the FUJIFILM
X-mount.
Remove the body cap from the camera
and the rear cap from the lens. Place the
lens on mount, keeping the marks on the
lens and camera aligned ( A ), and then
rotate the lens until it clicks into place
2
( B ).
O
When attaching lenses, ensure that dust or other foreign matter does
not enter the camera and be careful not to touch the camera's internal
parts. Do not press the lens release button while attaching the lens
and be sure the latch has securely clicked into place.
Removing Lenses
To remove the lens, turn the camera off , then
press the lens release button (
lens as shown (
O
To prevent dust accumulating on the lens
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the FUJIFILM
X-mount.
O
Before attaching or removing (exchanging) lenses, attach the lens caps
and check that the lenses are free of dust and other foreign matter.
Do not change lenses in direct sunlight or under another bright light
source, as light focused into the interior of the camera could cause it
to malfunction. See the manual provided with the lens for information
on use.
28
A ) and rotate the
B ).