Huawei SUN2000-(25KTL, 30KTL)-US User Manual page 71

SUN2000-(25KTL, 30KTL)-US
User Manual
Step 3 Insert the crimped positive and negative power cables into the corresponding positive and
negative connectors until a "click" sound is heard.
Figure 5-18 Inserting positive and negative connectors
After inserting the crimped positive and negative power cables into the corresponding
insulation housings, ensure that the cables are in position by checking for resistance when a
slight pull is applied.
Step 4 Tighten the locking nuts on the positive and negative connectors.
Secure the nuts using a removal wrench, as shown in
Issue 03 (2017-04-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Figure 5-19.
65