SUN2000-(25KTL, 30KTL)-US
User Manual
Figure 5-10 Connecting AC output power cables
(1) Neutral wire not connected
----End
Procedure (Common Connection)
Step 1 Route the cables through the AC OUTPUT hole.
Step 2 Prepare OT terminals.
Issue 03 (2017-04-01)
When connecting the SUN2000 output power cable, you can choose whether to connect
the neutral wire or not according to the local national regulations and installation
specifications.
AC output terminals must be parallel.
When installing the AC output power cable, the torque must not exceed 6 N· m. Otherwise,
the AC terminal block may be damaged.
Ensure that the AC output power cable is securely connected. Otherwise, the SUN2000
may fail to operate or the terminal block may be damaged after the SUN2000 operates.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Neutral wire connected
58