Huawei SUN2000-(25KTL, 30KTL)-US User Manual page 60

SUN2000-(25KTL, 30KTL)-US
User Manual
Procedure
Step 1 Prepare OT terminals.
Figure 5-5 Stripped length
Figure 5-6 Crimping a cable
Step 2 Route the prepared cable through the GND and AC OUTPUT cable holes, and tighten the
screw using a torque screwdriver.
Issue 03 (2017-04-01)
The cavity formed after the conductor crimp strip is crimped must wrap the core wires completely. The
core wires must contact the terminal closely.
If cables are routed through a pipe, you can secure the pipe after connecting the ground cable to ground
point 4 and connecting the AC output power cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
54