Kingston Technology DataTraveler 4000 User Manual page 15

3. Create a password to protect your data on the DT4000. Enter it in the 'Password' field,
then re-enter it in the 'Password Confirmation' field, as seen below in
password you create must meet the following criteria before the initialisation process will
allow you to continue:
1. Passwords must contain 8 characters or more (up to 16 characters).
2. Passwords must contain three (3) of the following:
- UPPER CASE, lower case, numeric and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be
useful in providing a clue as to what the password is, should the password ever be
forgotten. (Note: The hint CANNOT be an exact match to the password.)
Document No. 48000127-001.A04
Figure 7.3 – Password setup
®
DataTraveler 4000
. The
Figure 7.3
Page 14 of 28