Samsung DMR57 Training Manual page 56

Relay and Fuse Replacement
1.
2.
3.
Unscrew the screws (2) connecting the right frame. When you separate the right
frame, you can check the Fuse & Relay. Pull out Fuse case that is attached to the
base. Open the Fuse case. Check the fuse & replace if defective. Separate the
Relay terminals. Remove the screws of the relays using short-body screwdriver.
When reconnecting the relay terminals after check or replacement, you must be
careful not to switch the connectors to the wrong relay.
1) Unscrew the screws (2 Screws) connecting the Frame R.
2) When you separate the Frame R, you can check the
Fuse & Relay.
3) Pull out Fuse case that be fixed on hook of Base.
4) Open the Fuse case.
Check the fuse. & It can replacement.
5) Separate the terminal of Relay.
Unscrew the screws of relay using short-body screwdriver.
4.
※ Check List
▶
When reconnecting the relay terminals
after check or replacement, you must be
careful not to switch the connectors to the
wrong relay.
56