Samsung DMR57 Training Manual page 51

Fan Vent Disassembly Part 2
5.
7.
5. Remove the 2 screws holding the cover fan in place. 6. Hold and remove both
the case vent ASSY. and the duct condenser ASSY. [Caution]
removing them as the duct condenser is touching the bracket door link. 7. Remove
the 2 screws holding the fan motor from the case vent ASSY. And carefully pull out
the fan motor. 8. Remove the duct condenser from the case vent ASSY (3 screws).
Careful not to scratch or dent the stainless steel covers or the damage the
customer's floor or cabinets.
6.
5) Remove the 2 screws holding the cover
6) Hold and remove both the case vent ASSY
7) Remove the 2 screws holding the fan
8) Remove the duct condenser from the case
8.
※ Check List
▶ Because there is a risk of leakage after
▶ Check the voltage of Fan Vent ends: 120V
▶ PCB RELAY : Check CN1 ~ CN14(120V)
▶ Measure coil resistance of both ends: 150Ω
fan in place.
and the duct condenser ASSY.
[Caution]
- Be careful while removing them as the
duct condenser is touching the bracket
door link.
motor from the case vent ASSY. And
carefully pull out the fan motor.
vent ASSY (3 screws).
replacement, check whether it is sealed
properly.
- Be careful while
51