Samsung DMR57 Training Manual page 50

Fan Vent Disassembly Part 1
1.
3.
Open the door and unscrew the screws of Front Frame and Front Tub (12 screws)
[Caution] - When you unscrew all the screws, the Front Door can snap closed
injuring the worker. After separating the Fan Motor terminal, put the Front Frame
assembly down on the floor. Disassemble the Bracket Cover Fan. (1 Screw)
Disassemble the Cover Fan by rotating it counterclockwise with a jig or long nose
pliers. (the insulated end) When working on the front cover careful not to dent or
scratch the stainless steel sheet metal.
1. Open the door and unscrew the screws of Front
Frame and Front Tub (12 screws)
[Caution]
- When you unscrew all the screws, the Front Tub can
close up injuring the worker.
2. After separating the Fan Motor terminal, put the Front
Frame assembly down on the floor.
2. 3. Disassemble the Bracket Cover Fan. (1 Screw)
4. Disassemble the Cover Fan by rotating it
counterclockwise with a jig or long nose pliers.
4.
50