Web Interface; General; Sensors Overview Page; Figure 6: Overview Page - Sensor, I/O, And Relay Data - Geist Watchdog 100 Instruction Manual

Web Interface

General

The unit is accessible via a standard, unencrypted HTTP connection as well as an encrypted HTTPS (SSL) connection.
The following web pages are available:

Sensors Overview Page

The front page, Overview, gives a real time view of the unit's data. Readings for the internal temperature, humidity and
dew point sensors along with all I/O ports and external sensors, such as the A2D converter, will be shown. Plug-and-
play external sensors appear below the internal sensors when attached.
The menu bar allows access to the rest of the Environment Monitor's functionality.
Figure 6: Overview Page – Sensor, I/O, and Relay Data
1. Geist Logo
 Clicking on this logo from any page will reload the Sensors Overview page.
2. Sensors, System, and Help Tab
 Mouse over to show sub-menus:
3. Log In / Log Out
 Click to log in or log out of the unit. Note that both username and password are case sensitive and no
spaces are allow. Prohibited characters for username only are: $&`:<>[ ] { }"+%@/ ; =?\^|~',
4. Alarms and Warnings
 Indicates the number of Alarms and Warnings currently occurring, if any.
description.
GM1118 - Watchdog 100 Series User Manual BB3.0
Sensors: Available options are "Overview" (this page), "Alarms and Warnings", "Cameras",

and "Logging." (Refer to the appropriate section for more details).
System: Available options are "Users", "Network", "Email", "SNMP", "Syslog", "Admin", "Time",

"Locale", "Restore Defaults", and "Firmware Update." (Refer to the appropriate section for more
details).
Help: Available options are "Info" and "Support Site" (Refer to the appropriate section for more

details).
10
Mouse over to read
Revision Date: 12/31/2015