Table of Contents
Advertisement
22 www.electrolux.com
11.2 Electrical connection
Use a power cable of H05VV-F or higher.
Connect the appliance to a socket supply
line. If there is no socket supply line, the
electrical installation must have an isola-
tion device which lets you disconnect the
appliance from the power supply. The iso-
400V 3~
PE
L1
1
A
B
20
400V 2~
L2 L3
PE
L1
2
3
1
5
4
4.
min. 20
10
A
lation device must have a contact opening
width of minimum 3 mm (in reference to
NIN SEV 1000). The customer must have
a socket for the electrical connection that
is accessible and outside the coordination
room. The length of the connection cable
must be approximately 120 cm with lines
connected directly to the power supply.
L2
1.
Do the electrical connections as in the
connection illustration.
2
3
Connection diagram 400V
5
4
Phase definitions: L1, L2, L3 (or R, S,
T).
2.
Secure the cable grip.
Use at least 2 screws to fix the oven
on both sides (Detail A).
WARNING!
When installing next to a wood-fu-
elled boiler, a heatproof and heat-
insulating plate must be mounted
at the height of the appliance and
at least 30 cm deep.
Only a qualified person can con-
nect the appliance to the electrici-
ty supply.
WARNING!
If service is required always dis-
connect the appliance from the
power supply.
Advertisement
Table of Contents
