Hanwa Security Wisenet HCO-6070RP User Manual page 29

y MOTION :
This product generates signals each time an object movement is detected in the four areas
of the screen so efficient monitoring can be achieved.
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow
➊
indicates 'MOTION' .
Select a desired mode using the
➋
Function Setup switch.
y DET. AREA : Set the areas of
` SEL AREA : Select from four areas
` MODE : Determine whether to use the selected area.
` MASK : Under Motion Detection, If you don't want to see mosaic image on the
screen, you may turn MASK OFF.
If you wants to see mosaic image, please turn it on.
` TRANSPARENCY: Adds or removes transparency from the masking area.
` TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
` RETURN : Return to the MOTION DET menu.
y ALARM OUT : When object
` EXTERNAL : Send signals through external terminals.
` OSD : Display signals on the screen.
` RETURN : Return to the MOTION DET menu.
y SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the
y RETURN : Return to the SPECIAL SETUP menu.
M `
Depending on the shape of an object, there can be errors in size detection.
`
If the camera shoots an object a short distance away, the motion detection function can
be degraded.
`
In the following cases, motion detection event performance can be degraded or
malfunctions can occur.
- If an object' s brightness or color is similar to that of the background
motion detection.
that users want.
movement is
detected, the
detection signal
will be outputted.
higher level, the more sensitive.
MOTION DET
▶
DET. AREA
1.
ALARM OuT
2.
SENSITIVITY
3.
RETuRN
4.
ALARM OuT
▶
EXTERNAL
1.
OSD
2.
RETuRN
3.
I
5
IIIIIIIIII IIIIIIIIII
ON
ON
English_29