Hanwa Security Wisenet HCO-6070RP User Manual page 24

camera operation
y HLC (High Light Compensation) :
This function masks the strong light to minimize
white out due to over exposure and preserve much
of the on-screen details when the camera aims a
strong light source.
- LEVEL : Adjusts the brightness level of a
- LIMIT : Enable to change the operating condition.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be
- RETURN : Return to the MAIN SETUP menu.
y WDR
When there are both bright and dark areas at the same time, this mode makes both
areas distinctive.
- LEVEL : Select one from low, middle,
- RETURN : Return to the MAIN SETUP menu.
M `
If the white balance menu is set to manual, then HLC performance can be limited.
`
If you use the defog and HLC functions at the same time, saturation can occur in a
bright environment.
`
Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
`
When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In
NIGHT ONLY mode).
`
The HLC is not activated in day light or when bright light is not present at night. (In
NIGHT ONLY mode).
24_ camera operation
monitoring area.
enhanced.
high to adjust the brightness
of the WDR setup.
<WDR ON>
▶
LEVEL
1.
LIMIT
2.
TOP
3.
bOTTOM
4.
LEFT
5
RIGHT
6.
RETuRN
7.
wDR SETuP

LEVEL
1.
RETuRN
2.
<WDR OFF>
HLC SETuP
M I D D L E
NIGHT ONLY
I
3
IIII IIIIIIIIIIIIIIII
I
7
IIIIIIIIIIIIII IIIIII
I
3
IIII IIIIIIIIIIIIIIII
I
7
IIIIIIIIIIIIII IIIIII
MIDDLE