Hanwa Security Wisenet HCO-6070RP User Manual page 26

camera operation
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y COAX : You can select whether to use COAX communication.
y IMAGE ADJ
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
❶
arrow indicates 'IMAGE ADJ' .
Select a desired mode using the
❷
Function Setup switch.
- GAMMA : The setting range is 0.35 ~ 1.0.
- PED LEVEL : The setting range is
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image's sharpness.
y OFF : Released state
y ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
`
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
26_ camera operation
The closer to 1.0 the setting is,
the darker it gets.
1 ~ 100. The closer to
100 the setting is, the
higher the PED level
gets.
smaller the color gain gets and the more color blind it gets.
Increase or decrease the level of each mode to adjust the level of sharpness.
IMAGE SETuP
▶
GAMMA
1.
PED LEVEL
2.
COLOR GAIN
3.
4. H-REV
5. V-REV
6. SHARPNESS
RETuRN
7.
uSER
I
5
IIIIIIIIIIIIIIIIIIII
I
50
IIIIIIIIIII IIIIIIIII
OFF
OFF
ON