Hanwa Security Wisenet HCO-6070RP User Manual page 19

 1. VIDEO FORMAT
Select the
function using
the Function
Setup switch.
1. Press the Function Setup switch.
y Main SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
y y Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
M
`
An item with the
with the icon and press the Function Setup switch.
`
An item with the --- icon is unavailable due to function settings.
VIDEO FORMAT
1. When the SETUP menu screen is
displayed, select 'VIDEO FORMAT'
by using the Function Setup switch
so that the arrow indicates 'VIDEO
FORMAT' .
2. Select a desired mode using the
Function Setup switch.
y The video output can be selected
from AHD/CVBS/CVI/TVI.
M
`
By pressing the function setting button for more than 5 seconds, you can change
the setting from AHD, TVI, and CVI to CVBS. From CVBS, you can change it to AHD.
MAIN SETuP
2. PROFILE
3. wHITE bAL
4. EXPOSuRE
5. bACKLIGHT
6. SPECIAL
7. EXIT
icon also has sub menus. To select a sub menu, select an item
AHD
Change the status
bASIC using the Function
Setup switch.
ATw
OFF
SAVE
MAIN SETuP
 1. VIDEO FORMAT
2. PROFILE
3. wHITE bAL
4. EXPOSuRE
5. bACKLIGHT
6. SPECIAL
7. EXIT
AHD
bASIC
ATw
OFF
SAVE
English_19