Connecting To Power - Hanwa Security Wisenet HCO-6070RP User Manual

connection
CONNECTING TO MONITOR
Connect the Video OUT port on the rear panel of the camera to a AHD DVR.
y As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
y Only connect the cable when the power is turned off.
M
`
This product supports 4 video output formats of AHD, CVBS, TVI, and CVI. The default is
AHD. Select the video output appropriate for your DVR.

CONNECTING TO POwER

You can connect power as shown in the following figure.
REC HDD ALARM NETWORK BACKUP POWER
AHD DVR
Monitor
Power Input Terminal
REC HDD
English_15