Positioning The Waist Buckle - Apeks wtx series Owner's Manual

Positioning Waist Buckle
The metal waist buckle can be mounted on either side of the
waistband.
If you would like to switch the buckle to the
other side, weave the buckle as shown. Don
the WTX harness with cylinder(s) and your
normal exposure suit. Run the -inch waist-
band through the buckle so that the buckle
will be positioned where you like.
Excess strapage may be cut with scissors and the end
burned with a lighter to prevent unraveling.
Note: Do not cut the excess strapage so short that you cannot
enlarge it in the future to compensate for a thicker exposure suit.
WTX Series Owner's Manual