AEG VAMPYR CE Operating Instructions Manual page 14

Switching On
Switch On and Off
The appliance is switched on and off by
pressing the On/Off button.
Power Regulation*:
Power Regulation – Rotary Regulator
The suction power can be adjusted to suit the
specific situation using the electronic power
regulator.
Output control, Mega-Power
A Switching on and
off.
Switch on you vacuum
cleaner with the power
adjustment wheel by
turning
adjustment wheel in the
direction of the arrow
� max. The operating lamp indicates that the
vacuum cleaner is connected to the mains volt-
age and is ready for operation.
B Suction power adjustment.
With the power adjustment wheel you can set
the power of your vacuum cleaner to the opti-
mum value for the relevant cleaning work.
NOTE: If the power adjustment wheel is turned
fully to the right, this setting gives you a strong
suction, economical power setting for most
cleaning work.
C Mega-Power button.
Press the Mega-Power button for cleaning work
which requires a particularly high suction
power. The vacuum cleaner then runs at maxi-
14
14
mum power. The Mega-Power indicator lamp
lights up for as long as the Mega-Power stage is
activated. In this power stage, the adjustment
wheel only has the function of the on / off
switch. Power adjustment is not possible in this
stage.
Maintenance and Cleaning
Be sure that the appliance is turned off and that
the mains plug has been removed from the
socket before performing maintenance or clean-
ing.
Changing the Paper Filter
The paper filter must be replaced if the window
on the filter replacement indicator is completely
red when the appliance is operating at maxi-
mum power and the nozzle is raised from the
floor.
The paper filter should be replaced even if it
does not appear to be full because fine dust can
block the pores in the surface of the filter.
the power
The cover can be opened by pressing the button
and folding back until it locks.
*depending on model