Cooktop Setup - Dacor Epicure EG366 Installation Instructions Manual

COOKTOP SETUP
Spill Tray
Install the Burner Components
NOTE: Do not attempt to adjust the burner air mixture
settings. All adjustments are preset at the factory.
• Remove the burner rings, burner caps and grates from their
shipping packages.
• Install the burners as shown.
• Gently set the grates on top of the spill tray. Put the legs of
each grate inside the corresponding dimples.
Ridge on bottom
of burner cap
STEP 2: Install
burner ring. Line
up ring tabs with
head slots. Twist
back and forth
to assure proper
seating.
STEP 3: Install
burner cap. Ridge on., ,,
cap must surround _/_ ._. 'X_
top ofnng. _(k_ _=_ 9
_Burner Ring
STEP 1: Install _ Burner Head
_r"h'ead. Put<,/
locating tap into \
keyed hole.
_
_Keyed ............... Burner Base
Hole
Crown Burner Installation
Crown Burner
STEP 3: Install burner
caps. Ridge on cap
must surround top of
ring.
STEP 2: Turn ring until
it drops into place.
Twist back and forth to
assure proper seating.
STEP 1: Put burner
ring on top of the head.
Burner
Ridge on bottom
of burner cap
Burner Ring
_ner Head
Stack Burner Installation
_a=Qr 9