Technical Specifications - Danfoss FH-CWP Instruction Manual

Instruction FH-CWP Thermostat

11. Technical Specifications

Feature
Approval
Colour
Dimensions
Adjustment mode
Fault indication/
failure mode
Frost protection
Ambient
temperature
Precision
Hysteresis
IP class
LCD backlight/
nightlight
LCD display
Produced by Danfoss Floor Heating Hydronics 05.2011
Description
CE Marking, EN 60730
White, RAL 9016
86 x 99 x 19mm
Push buttons
If room sensor failure, E1 will
be displayed. If floor sensor
failor, E2 will be displayed. In
any case, thermostat will turn
off all output of relays.
Yes, if enabled:
< 5 °C heating on
> 7 °C heating off
- 10 °C – 60 °C
±1 °C
1 °C, symmetrical around the
setpoint temperature
30
Yes
Yes
VI.CU.C2.02
13