The Mercury & Intuitive Range; Variants; Mercury Mk2 6-5; Intuitive Mercury 6-5 - Resource Data Management PR0712-EPR Installation & User Manual

Mercury 2 & Intuitive Mercury EPR Stepper Installation Guide
The Mercury Mk2 controller is primarily intended for use in refrigeration display cabinets or coldroom applications. The controller will
operate an evaporator pressure regulator stepper valve based on the average value of the evaporator air on and air off probes. It has
outputs to control lights, fans, a suction line valve, and defrost control.
There is also a DIN rail mounted range, known as the Intuitive Mercury range, which is designed to be used in a control panel or electrical
tray. This range has the same features as the Mercury Mk2 controller with additional benefits such as higher rated relays each protected
by an integral fuse and the option for an internal daughter card to read suction pressure directly which can then be converted to the
evaporator in temperature for use in calculating superheat.
The controller supports PT1000, NTC2K, 470R, 700R, 3K, 5K, 6K, NTC2K25, NTC10K or NTC10K(2) temperature probes (note: probe
types cannot be mixed)

Variants

Mercury Mk2 6-5

Description
Mercury Mk2 6-5 Stepper valve controller, integral display.
Mercury Mk2 6-5 Stepper valve controller, remote display.

Intuitive Mercury 6-5

Description
Intuitive Mercury 6-5 Stepper EPR valve controller, integral display.
Intuitive Mercury 6-5 Stepper EPR valve controller, remote display.
Intuitive Mercury 6-5 Stepper EPR valve controller, integral display with a 4-20mA Input
Daughter Card
Intuitive Mercury 6-5 Stepper EPR valve controller, remote display with a 4-20mA Input
Daughter Card
Intuitive Mercury 6-5 Stepper EPR valve controller, integral display with a 0 – 10V Input
Daughter Card
Intuitive Mercury 6-5 Stepper EPR valve controller, remote display with a 0 – 10V Input
Daughter Card
Intuitive Mercury 6-5 Stepper EPR valve controller, remote display with a 0 – 10V Input and
Probe Daughter Card (for use with the Intuitive Power Store PR0627)
Intuitive Mercury 6-5 Stepper EPR valve controller, remote display with a 4-20mA Input and
Probe Daughter Card (for use with the Intuitive Power Store PR0627)

Compatible Displays

The following displays are compatible with the Mercury / Intuitive Remote Display Controllers (PR0713 & PR0762): -

Configuration

The controller gives you up to four configuration options, the controller is delivered pre-configured as type 3
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Please Note
The Mercury & Intuitive Range
From Resource Data Management
Description
Mercury Remote Display with 5m cable
Mercury Keyswitch Remote Display with 5m cable
Mercury DIN Remote Display with 5m cable
Mercury DIN Keyswitch Remote Display with 5m cable
Mercury mk2 Remote Display with 5m cable
Display value
3
4
5
6
Mercury Mk2 / Intuitive 6-5
Remote piped case controller LT
Remote piped case controller HT
Coldroom controller LT
Coldroom controller HT
Revision 1.2a
Part Number
PR0712-EPR
PR0713-EPR
Part Number
PR0752-EPR
PR0762-EPR
PR0752-EPR-IP-AiAo
PR0762-EPR-IP-AiAo
PR0752-EPR-IP-ViVo
PR0762-EPR-IP-ViVo
PR0752-EPR-IP-1PVi
PR0752-EPR-IP-1PAi
Part Number
PR0325
PR0326
PR0327
PR0328
PR0725
Page 4 of 25
www.resourcedm.com