Mechanical Instructions - Philips 273E3QHSB/93 Service Manual

Meridian 3
32

10. Mechanical Instructions

Note: Because the way of 273E3QH disassembly is the same as 273E3, so take the 273E3 for example:
Step 1: Remove the stand-base assy
1. Place the monitor face on a safe surface, and
remove the three screws to remove the stand base
assy from the monitor.
Step 2: Remove the rear cover
1. Open the latches and along the red arrowhead
direction as the picture to open other latches.
Step 3: Remove the bezel
1. Disconnect the key cable to remove the bezel.