HYOSUNG GV250 EI Service Manual page 76

ELECTRICAL SYSTEM 5-5
▣ ▣ IGNITION COIL RESISTANCE
INSPECTION
Disconnect the ignition coil lead wire.
Measure the ignition coil resistance in bolt the
primary and secondary windings. If the resistance is
not within the standard range, replace the ignition coil
with a new one.
IGNITION COIL / PLUG CAP RESISTANCE
3.5 ~ 5.5 Ω (
Primary Terminal - Terminal)
㏀
Secondary
20 ~ 31 (Plug cap - Terminal)
㏀ ㏀
Tester knob indication : Resistance ( )
75