Pioneer AVH-P3100DVD Service Manual page 70

1
2. Touch Panel Calibration
[How to activate the touch panel test mode]
A
Choose "Touch Panel Calibration" among the monitor test mode menu screen.
[Menu types in the mode]
The calibration test mode consists of the following menus.
Top menu
Outermost circumference inspection
16 points adjustment
Coordinate inspection
Calibration verification
B
Data initialization
[Operation specification]
Operational description
Selection cursor up movement
Selection cursor down movement
Return to test mode mene
Menu enter
[Description of the top menu]
[Display specification]
C
D
Conditions for lighting of the adjustment complete mark " * ".
Outermost circumference inspection :
In case the outermost circumference inspection has been completed normally.
16 points adjustment :
In case the calibration has been completed normally.
Conditions for the adjustment complete mark " * " to go out.
E
Outermost circumference inspection :
In case the outermost circumference inspection has never been performed.
In case the EEPROM initialization has been performed.
In case the adjustment value has been initialized.
16 points adjustment :
In case the 16 points adjustment has never been performed.
In case the EEPROM initialization has been performed.
In case the adjustment value has been initialized.
F
70
1
2
Remote controller key
2
8
1
5
AVH-P3100DVD/XN/UC
2
3
Flicker initialized state
3
4
4