Troubleshooting - Uniden Guardian App Cam 26 Quick Start Manual

Mounting the Plate and Camera
1. Hold the mounting
plate where you want
to mount it and mark
the location of the
screw holes.
2. Use the included
screws and anchors
to attach the mounting
plate to the wall.
3. Use the enclosed
screws to screw the
camera to the bracket.

Troubleshooting

If...
My smartphone
or wireless device
cannot find the
camera during setup.
The app cannot find
the camera
The camera does
not find the router to
connect to
Try This...
Make sure the camera's green LED is blinking
in a 3-flash/pause pattern. If it isn't, reset the
camera by using a blunt pin to press and hold
the Reset button until the LED begin to flash.
Make sure your network supports DHCP
protocol.
Make sure that the DHCP option is turned on.
Make sure the camera and your mobile device
connect to the same WiFi router.
Make sure the WiFi router is activated.
Make sure the camera is properly powered
on.
Make sure the WiFi router has enabled SSID
broadcasting.
Make sure you selected the correct router in
the Manage WiFi Network box.
Make sure you entered the correct password
for the router you selected in the Manage WiFi
Network box.
5