Wireless - D-Link DIR-869 User Manual

Section 4 - Coniguration
From this page you can conigure your wireless network settings.
2.4GHz
Enable or disable the 2.4GHz wireless network.
Status:
Create a name for your wireless network using up to 32 characters.
Wi-Fi Name (SSID):
Create a password to use for wireless security.
Password:
Advanced Settings
Choose None, WEP, or WPA/WPA2-(Personal) (recommended).
Security Mode:
Select the desired wireless networking standards to use. The available
802.11 Mode:
options are Mixed 802.11b/g/n, Mixed 802.11g/n, 802.11n only.
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel:
Select the desired wireless transmission power.
Transmission
Power:
Select Auto 20/40 if you are using both 802.11n and non-802.11n
Channel Width:
devices, or select 20 MHz if you are not using any 802.11n devices.
Enable or disable HT20/40 Coexistence.
HT20/40
Coexistence:
The default setting is Visible. Select Invisible if you do not want to
Visibility Status:
broadcast the SSID of your wireless network.
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 76 for more information.
D-Link DIR-869 User Manual

Wireless

59