D-Link DIR-869 User Manual page 43

Section 4 - Coniguration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP
connection. Your ISP will provide you with a username and password.
Enter the L2TP server IP address provided by your ISP.
L2TP Server IP
Address:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either Always-on, On-Demand, or Manual.
Reconnect Mode:
Enter a maximum idle time during which the Internet connection
Maximum Idle
is maintained during inactivity. To disable this feature, enable Auto-
Time:
reconnect.
Advanced Settings
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Dynamic IP
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP. The recommended setting is Auto.
D-Link DIR-869 User Manual
L2TP
39