D-Link DIR-869 User Manual page 53

Section 4 - Coniguration
Select PPPoE if your Internet connection requires you to enter a username and password.
This information is provided by your Internet Service Provider (ISP).
Choose Share with IPv4 to re-use your IPv4 PPPoE username and
PPPoE Session:
password, or Create a new session.
Enter the username provided by your ISP. (Create a new session only)
Username:
Enter the password provided by your ISP. (Create a new session only)
Password:
Select Static IP if your ISP assigned you an IP address. In most cases,
Address Mode:
select Dynamic IP.
Enter the IP address provided by your ISP. (Static IP only)
IP Address:
Enter the ISP service name (optional).
Service Name:
Select either Always-on or Manual.
Reconnect Mode:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
D-Link DIR-869 User Manual
PPPoE
49