Panel Identification - Kolpak Walk-In Installation & Operation Manual

If the panels must be stored outside, store them on edge with the grooved side (female
rail) facing down. Kiln-dried wood spacers provide a ventilation gap to prevent moisture
stains from forming on the panels' metal skins. Cover the panels with black plastic to
keep out sunlight and moisture. Be sure the plastic does not touch the ground, allowing
air circulation.

Panel identification

Each panel is labeled to aid in identification and proper placement. Panel item numbers
are referenced on the product assembly drawing showing proper location for intended
installation within the unit.
www.kolpak.com 800-225-9916 5