Mounting The Assembled Garage Door Opener - Home Master GDR02 Operator's Manual

Mounting the Assembled Garage Door Opener

Mounting the assembled garage door opener is done in three main steps:
- Attach the Rail to the Wall
- Attach the Motor Assembly to the Ceiling
- Attach the Door Brackets to the Garage Door and Garage Door Bracket
Attach the Rail to the Wall – Se ctional & One Piece Doors
- Be sure to securely mount the garage door opener.
- Never touch any moving part while the garage door opener is in operation.
- Do not attempt to fix the garage door opener if it jams or malfunctions. Call a DGO installation professional for
assistance.
1. T he first step is to determine where to attach the wall bracket. How you do this depends on whether you
have a sectional garage door on rails or a one piece garage door.
If you have a sectional garage door, do the following:
a. Open the door to the highest point of travel. In the center of the wall above the door, draw a
horizontal line 2" above the high point of the garage door . This height will provide tr avel clear ance for
the top edge of the door.
12
To avoid injury or death:
1/2 HP Chain Drive Garage Door Opener