Sanyo DC-D27 Instruction Manual page 12

Hide thumbs Also See for DC-D27:
Table of Contents

Advertisement

BEFORE RECORDING AND DUBBING
i
~
::='"9s)
Recording
copyright
material
without
permission
of the copy-
Accidental
erasure prevention
tabs (for protecting
right owners
is usually
an infringement.
If you wish to re-record
copyright
material
permission
from the copyright
owner is nec
Accidental erasure can be prevented by breaking out the tabs on the end
essary.
SANYO
does
not approve
of, and cannot
be held
re-
ef the cassette tape (where the tape is not exposed) using a screwdriver
sponsible
for, any unlawful
use of this machine.
If a tab is broken out in error and you wish to re-record the tape, simply
Use deck B for recording.
block the tab hole using adhesive tape and the tape can be used for
recording again.
1.
Press the cassette holder (EJECT portion) to open it and load the
cassette for recording.
For Cr02/Metal
tape
2.
Set the DOLBY NR button to ON or OFF as desired.
Side A
Dolby NR ON .
"on
B NR appears
Dolby NR OFF
.
"
O B NR" disappears
Automatic
record muting
%
*
FV
Undesirable parts of a programme
can be omitted while recording.
>9
'~~ ~
Press the REC MUTE button once while recording. The REC PAUSE
Side B
indicator blinks and a 5-second unrecorded blank space is created, then
the cassette deck enters the record pause mode. The REC PAUSE
Break out tab A for side A.
indicator lights and "F"
blinks on the display.
Break out tab B for side B.
-
To add another 5-second blank space, press the REC MUTE button
again.
-
To resume recording, press the D button.
Note:
The record muting function does not operate during CD computer record-
ing or tape high-speed
dubbing.
RECORDING
RECORDING
COMPACT
DISCS
For programmed
recording,
programme
the material
in advance
(as
described under "PROGRAMMED
PLAY").
Computer
recordipg
With computer recording, you can record a CD onto a cassette by pressing
just one button.
1.
2.
3.
4.
5.
6.
Load the disc to be recorded.
Load a blank cassette into deck B.
Select "CD".
Press the disc select button (DISC 1, DISC 2 or DISC 3) to select the
disc to be recorded first, then press the STOP button.
For programmed
recording, this step is unnecessary.
Press the COMPU.
REC button.
The system automatically
performs the following functions:
Deck B:
-
The tape rewinds to the beginning.
Recording starts.
CD player:
The player searches for the first track to be recorded, then enters
the pause mode.
-
CD play starts.
The DECK B and REC PAUSE indicators light, "COMPU. REC and
"A appear on the display as recording begins.
[COMPU REC]
~
~
%='1
~
~R~~l(
0.01 y
•E
1234
;:;;
After deck B stops automatically,
turn over the cassette and reinsert
it.
If the tape ends while a track is still playing, the CD player enters
the pause mode at the beginning
of the track that was playing.
This track will be recorded at the beginning of side B.
7.
Press the COMPU. REC button. Recording of side B starts automati-
cally.
When the end of the tape (side B) is reached, the CD player and deck
B stop automatically.
If the last track on the CD plays completely
before the end of the
tape, disc play stops automatically.
Deck B also stops.
Note:
Recording starts automatically
after 8 seconds, so the recording will
not be interrupted by the leader tape at the beginning of sides A and
B.
A 5-second blank space is automatically
recorded at the end of each
track.
To stop computer recording at anytime, press the STOP button on the
CD player or the
button on the deck. The CD player and deck B will
stop.
To record material from a different
position
on the tape, continue
recording manually.
Manual recording
1.
2.
3.
4.
Follow the steps 1-3
under "Computer
recording" above.
Press the disc select button (DISC 1, DISC 2 or DISC 3) to select
the disc, then press the STOP button. Select the track number to
be recorded if required.
Press the REC PAUSE button. Deck B enters the record pause mode.
The REC PAUSE and DECK B indicators
light. "
" blinks on the
display.
Press the D button. "›"
lights and recording starts.
To stop recording, press the
or STOP button.
When the end of the tape is reached, the CD player and deck B stop
automatically.
If the last track on the CD plays completely
before the end of the
tape, disc play stops automatically.
Deck B also stops.
-10-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC-D27 and is the answer not in the manual?

Table of Contents