LAVAZZA Jolie & Milk Operating Instructions Manual page 22

Press one of the switch-on/ supply buttons, and then
supply two cups (approximately 150 ml each) of water.
Allow the descaling solution to work for about 15-20
minute.
Switch-on the machine pressing one of the switch-on/
supply buttons, then proceed as described in steps
and .
Repeat the steps described in point
tank is completely empty.
Remove the tank and rinse it with fresh drinking water.
Fill it completely.
MAINTENANCE AND CLEANING
until the water
Switch the machine on by pressing one of the switch-
on/supply buttons. Place a suitable container under
the dispenser. Press one of the switch-on/supply but-
tons, then supply the full content of the tank.
When the water is finished, refill the tank and repeat
the steps described in point
end of the descaling cycle is completed.
51
E N
. When finished, the