Stand-By Function - LAVAZZA Jolie & Milk Operating Instructions Manual

EN IT
The machine rear features two outlets that can be used
for the power cord. You should use the most suitable
outlet for your needs.
Fit the supply plug into the power outlet.
Press one of the switch-on/supply buttons to switch
the macchine on.
MACHINE SETTING
The coffee machine starts the heating cycle. The switch-
on/supply buttons will start blinking to a light white.
During the heating cycle, you can book the drink, pressing
one of the switch-on /supply buttons. The drink will be
released after the end of the heating
The machine will be ready for use when the switch-on/
supply buttons light up to a steady white light white light.
At first power-on, supply at least 0.5 litres of water
without capsule placing a container under the coffee
spout.

STAND-BY FUNCTION

To ensure the energy conservation the machine automat-
ically passes to the stand-by mode after 9 minutes of not
being used. The machine can be set to the stand-by mode
manually, first of the 9 minutes' time, by keeping both but-
tons pressed down for at least 3 seconds. This mode is in-
dicated by the switching off of the buttons. The machine
can be reactivated by pressing the buttons
36
cycle.
again.
>
3
SEC