Colour Markers Replacement - GN Resound Pulse CRT PS60-R Technical Manual

Table of Contents

Advertisement

Colour Markers
How to place the colour marker:
Place the colour marker as long into the hole as
possible. Press on the back of the marker with a
finger and at the same time turn the pin around until it
breaks of.
How to remove the colour marker:
Push out the pin a 1/3 of its length using pin tool and turn the device
as if it was placed on the ear. The colour marker should then fall out.
If the colour marker is not falling out, the battery door can be opened
and from the inside the colour marker can be pushed out by using a
"colour marker remover" p/n 15426100.
The pin is pushed out
Turn the pin
around
Pressure here with a finger
Push the colour marker
from inside
Doc. No. 0127420 rev. B
Colour marker,
Red p/n 15075500
Blue p/n 15075501
Red p/n 15175600, 25 pcs
Blue p/n 15175601, 25 pcs
Page 12 of 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pulse crt lt pss60-r

Table of Contents