biochrom GeneQuant 1300 Quick Reference Manual page 5

Parameter Folder
Curve Fit Applications
Life Science
Day Utilities
Delay time Applications
Diluent Applications
Life science
Dilution Factor Applications
Life science
DP Applications
Life Science
Draw peaks Applications
Duration Applications
Dye name Life science
End wavelength Applications
Factor Applications
Factor Applications
Factor Life science
Factor Life Science
Factor Life Science
Factor Life Science
TM
GeneQuant 1300 Quick Reference Guide Page 5
Sub-Folder
Standard curve
Protein – BCA
Protein – Bradford
Protein – Lowry
Protein – Biuret
Date and Ti me
Kinetics – Parameters 1
Absorbance Ratio –
Parameters
Nucleic Acids – DNA
Nucleic Acids – RNA
Nucleic acids – Oligo
Cy Dye
Protein – Protein UV
Absorbance Ratio –
Parameters
Nucleic Acids - DNA
Nucleic Acids – RNA
Nucleic acids – Oligo
Cy Dye
Protein – Protein UV
Concentration
Kinetics – parameters 2
Standard Curve
Protein – BCA
Protein – Bradford
Protein – Lowry
Protein – Biuret
Wavescan, options 4 –
peak detection
Kinetics – Parameters 1
Cy Dye
Wavescan
Concentration
Absorbance Ratio –
Parameters
Kinetics – Parameters 2
Cy Dye
Nucleic acids – DNA
Nucleic acids – Oligo
Nucleic acids – RNA
Manual Description and options
page
53 Select the type of curve fit to be used.
30 Options: straight line regression (forces the
33 line through the origin), zero regression,
36 interpolated or cubic spline
39
62 Enter the day of the month
50 Enter the delay time in seconds before
measurements are taken. Maximum 600
seconds (10 minutes)
58 Enter the volume of the diluent. Range:
0.01 – 9999
13
15
17
23
28
58 Enter the dilution factor using the keypad
numbers or press
13 dilution factor
15
17
23
28
45 Determines the number of decimal places in
50 the results (0-2). Results have a maximum
53 of 5 figures
30
33
36
39
48 Yes/No – switches display of peak cursors
on and off
50 Enter the time in minutes over which
measurements are taken. Maximum 60
minutes
23 Enter the name of the dye
47 Enter the end wavelength for the spectral
scan. Range: 200 – 950 nm
45 Set the factor by which the result is
multiplied to give the result within a chosen
range. Only available if the mode selected
is Factor
58 Set the factor by which the result is
multiplied to give the result within a chosen
50 range. Range 0.01 – 9999
23 Enter the A
260
form of DNA or RNA being used
13 Enter the factor. Default is 50, range: 0.01-
9999
17 Enter the factor. Default is 33, range: 0.01-
9999
15 Enter the factor. Default is 40, range: 0.01-
9999
to calculate the
conversion factor for the the
Version 2.0