Table of Contents
Advertisement
15
Recording and
Pause TV
15.1
Recording
What You Need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need...
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by
means of DRM (Digital Right Management)
technology. In case of broadcasting protected
channels, recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to record a
protected broadcasting or play back an expired
recording, an error message can appear.
Record a Programme
Record Now
To record the programme you are watching right now,
press
(Record) on the remote control. The
recording will start immediately.
To stop the recording, press (Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme
ends. If no TV Guide data is available, the recording
will only last 30 minutes. You can adjust the end time
of the recording in the list of Recordings.
Schedule a Recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a programme...
1 - Press TV GUIDE.
2 - Use navigation keys to select Now, and
press OK.
3 - Select Now, Later, Tomorrow or the day you
need, and press OK or BACK to close the
menu.
4 - Select the programme you wish to record,
press OPTIONS, select
press OK. The programme is scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
leave the TV switched to Standby and the USB Hard
Drive switched on.
5 - Press BACK to close the menu.
Recording Conflicts
When two scheduled recordings are overlapping in
time, there is a recording conflict. To solve a recording
conflict, you can adjust the start and end time of one
or both scheduled recordings.
To adjust the start or end time of a scheduled
recording...
1 - Press SOURCES, and select
2 - At the top of the screen,
select Scheduled and press OK.
3 - In the list of scheduled recordings and reminders,
select Recordings and press OK to view the
scheduled recordings only.
4 - Select the scheduled recording that conflicts with
another scheduled recording and press OPTIONS.
5 - Select Adjust Time, and press OK.
6 - Select the start or end time and change the time
with the (up) or (down) keys.
Select Apply and press OK.
7 - Press BACK to close the menu.
Auto End Margin
You can set the time margin that the TV will add
automatically at the end of each scheduled recording.
To set the automatic end time margin...
1 - Press SOURCES, and select
2 - Use navigation keys to select at the upper right
corner and press OK.
3 - Select Auto End Margin and press OK.
4 - Press (up) or (down) and press
set the time margin added to a recording
automatically. You can add up to 45 minutes to a
recording.
5 - Press BACK to close the menu.
69
Record, and
Recordings.
Recordings.
OK to
Advertisement
Table of Contents
