Related Manuals for Philips 43PUS6504
Summary of Contents for Philips 43PUS6504
- Page 1 6504 series Register your product and get support at www.philips.com/TVsupport User Manual 43PUS6504 50PUS6504 58PUS6504 65PUS6504 70PUS6504...
-
Page 2: Table Of Contents
Contents 13.2 Connect to Network 1 Get Support 13.3 Wireless and Network Settings 1.1 Identify and Register your TV 14 Smart TV 1.2 TV Help and User Manual 1.3 On-line Help and User Manual 14.1 Setup Smart TV 1.4 Consumer Care / Repair 14.2 Smart TV Start Page 14.3 App Gallery 2 Software... -
Page 3: Get Support
Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number. - Page 4 cause severe injury, irrepairable damage to your TV or void your warranty.
-
Page 5: Software
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. -
Page 6: Quick Guide
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ... - Page 7 • If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. • To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
-
Page 8: Ir Sensor
Prese + or - to adjust the volume level. 3 - Number keys To select a channel directly. 4 - Search Search key for Smart TV and Freeview Play. 5 - - EXIT Press in middle to switch back to watch TV. To stop an interactive TV application. -
Page 9: Setting Up
To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. TV Placement • 43PUS6504 VESA MIS-F 200x200, M6 (Minimum 12 mm, Tips on Placement Maximum 18 mm) • 50PUS6504 VESA MIS-F 200x200, M6 (Minimum 12 mm, •... - Page 10 Connect Power Cable • Insert the power cable into the POWER connector on the back of the TV. • Make sure the power cable is securely inserted in the connector. • Make sure that the power plug, in the wall socket, is accessible at all times.
-
Page 11: Connections
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. -
Page 12: Audio Device
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. -
Page 13: Mobile Device
mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device. -
Page 14: Other Device
When you switch on the TV, it may take a few minutes favourite app store today. before the CAM is activated. If a CAM is inserted and The Philips TV Remote App is available for iOS and subscription fees are paid (subscription methods can Android and is free of charge. - Page 15 To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on 1. Press SOURCES . your TV before you install the USB Hard Drive. 2.
- Page 16 A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
-
Page 17: Switch Source
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ... -
Page 18: Channels
for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. About Channels and Switch 3 - Select Start and press OK to update channels. This can take a few minutes. Channels Quick reinstall ... - Page 19 frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
- Page 20 • Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
- Page 21 (Home) > Settings > Install Manual Installation Channels > Satellite installlation > Search for satellite > Remove satellite (Home) > Settings > Install Channels > Satellite installlation > Manual You can remove one or more satellites from your installtion current satellite installation.
- Page 22 With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
-
Page 23: Channel List
language (the language set on TV), the TV can show Channel info subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages Select Channel info to view the technical information must also be part of the broadcast. of the channel. - Page 24 Channel List Options Select Channel Range > OK > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
-
Page 25: Favourite Channels
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite Favourite Channels channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default About Favourite Channels list will be appended after your favourite channels for your preview. - Page 26 Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV.
-
Page 27: Tv Guide
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go What You Need back to the previous day. Alternatively, you can press ... - Page 28 Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
-
Page 29: Freeview Play
Freeview Play About Freeview Play To enjoy Freeview Play*, you need to connect your TV to Internet first. Freeview Play offers: • Watch TV programmes you missed from the last seven days. • Watch live TV and on demand, all in one place without entering an app, you can search Freeview Play programmes in TV Guide. -
Page 30: Recording And Pause Tv
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel. -
Page 31: Pause Tv
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds. -
Page 32: Videos, Photos And Music
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 11.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only. -
Page 33: Videos
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random. -
Page 34: Open Tv Setting Menus
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •... - Page 35 not supported in Monitor mode. The TV is able to play (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Contrast will be applied. Press the arrows (up) or (down) to adjust the contrast value of the picture.
- Page 36 Custom colour temperature Dynamic Contrast Select Custom in Colour temperature menu (Home) > Settings > All to customise a colour temperature yourself. Press settings > Picture > Expert mode the arrows (up) or (down) to adjust the value. settings >...
- Page 37 different degress of smoothing the artefects in digital extreme picture formats can still show black bars. video content. Picture content aspect ratio may change. MPEG artefacts are mostly visible as small blocks or • Fit to screen – automatically zooms in the picture jagged edges in on-screen images.
- Page 38 • Original - Most neutral sound setting Select On a TV stand or On the wall to have best • Movie - Ideal for watching movies sound reproduction according to the setting. • Music - Ideal for listening to music •...
- Page 39 the TV speakers when the device is playing the • If you cannot set a delay on the Home Theatre sound. System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture.
- Page 40 control > On General Settings Connection Related Settings Note: - EasyLink might not work with devices from other Format USB Hard Drive brands. (Home) > Settings > All settings > General - The HDMI CEC functionality has different names on settings >...
- Page 41 Adjust Picture and audio Eco Settings (Home) > Settings > All settings > General Set energy saving level settings > Shop setup > Picture and audio (Home) > Settings > All settings > General Select Optimized to shop or Custom settings for settings >...
- Page 42 Auto delay setting Digital TV channels can broadcast audio with several Set the Auto delay time from 15 seconds to 5 minutes. spoken languages for a programme. You can set a preferred primary and secondary audio language. If Auto loop selection audio in one of these languages is available, the TV will switch to this audio.
- Page 43 PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people (Home) > Settings > All settings > Universal access >...
- Page 44 Set code (Home) > Settings > All settings > Child lock > Set code Set the PIN code to lock or unlock the TV.
-
Page 45: Wireless And Networks
If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet. -
Page 46: Wireless And Network Settings
(Home) > Settings > All settings > Wireless (Home) > Settings > All settings > Wireless and networks > Clear Internet Memory and networks > Static IP configuration With Clear Internet Memory you clear your Philips 1 - Select Static IP configuration and configure the... - Page 47 Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
-
Page 48: Smart Tv
Search Smart TV With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and 14.1 press OK to start searching. You can enter names, Setup Smart TV titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a The first time you open Smart TV, you need to... -
Page 49: Tv On Demand / Video On Demand
TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store. -
Page 50: Netflix
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. -
Page 51: Rakuten Tv
Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app. -
Page 52: Amazon Prime Video
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. -
Page 53: Youtube
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. -
Page 54: Environmental
1 year. You quality materials and components, which can be can also find the power consumption values for this recycled and reused. product on the Philips website for your country www.philips.com/TVsupport 20.2 Product Fiche... - Page 55 Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health.
-
Page 56: Specifications
HD (50Hz or 60Hz) YCbCr 4:2:0 signals. Display Resolution Diagonal screen size Component, Composite • 43PUS6504 : 108 cm / 43 inch • 50PUS6504 : 126 cm / 50 inch Composite • 58PUS6504 : 146 cm / 58 inch • PAL, NTSC, SECAM •... -
Page 57: Sound
• Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 21.5 photo Supported Input Resolution - Wi-Fi Certified Computer This TV supports Miracast certified devices. Performance may vary, depending on the capabilities • 640 x 480 - 60Hz of the mobile device and the software used. •... -
Page 58: Troubleshooting
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual. -
Page 59: Satellite
Press (Home) > Settings > Help > Check the TV. settings at the start of the installation. You can set the If the video clip stays black, call Philips. Wait until the TV to search for One, Two or 3/4 satellites. -
Page 60: Sound
Call the telephone number for your country. (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change Picture does not fit the screen / Wrong or unstable back to current source. -
Page 61: Hdmi - Uhd
22.8 22.10 HDMI - UHD Wi-Fi and Internet HDMI Wi-Fi network not found or distorted • Note that HDCP (High-bandwidth Digital Content • Check if the firewalls in your network allow access Protection) support can delay the time taken for a TV to the TV's wireless connection. -
Page 62: Safety And Care
Contact Philips TV Consumer Care to have the TV • NEVER place a television set in an unstable location. checked before use. • NEVER place the television set on tall furniture (for •... -
Page 63: Screen Care
Lightning Storms Clean Disconnect the TV from the power outlet and antenna • Never touch, push, rub or strike the screen with any before lightning storms. object. During lightning storms, never touch any part of the • Unplug the TV before cleaning. TV, power cord or antenna cable. -
Page 64: Terms Of Use
TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V. -
Page 65: Copyrights
25.4 Copyrights DTS-HD (italics) DTS 25.1 For DTS patents, see http://patents.dts.com. HDMI Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol The terms HDMI and HDMI High-Definition together, DTS-HD, and the DTS-HD logo are Multimedia Interface, and the HDMI Logo are registered trademarks and/or trademarks of DTS, Inc. -
Page 66: Open Source
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 26.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software. - Page 67 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
- Page 68 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
- Page 69 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
-
Page 70: Disclaimer Regarding Services And/Or Software Offered By Third Parties
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations. -
Page 72: Index
Digital Out Offset 39 Parental Rating 43 Dynamic Contrast 36 Pause TV 31 Philips Support 3 Philips TV Remote App 14 End of Use 54 Photos, Videos and Music 32 Energy Saving 41 Picture Clean, Noise Reduction 36 Equalizer 38... - Page 73 Picture, Colour 35 Update Software - Local Updates 5 Picture, Contrast 35 Update Software - OAD 5 Picture, Sharpness 35 Update Software - USB 5 Power Cable 10 USB Flash Drive 15 Problems 58 USB Hard Drive 40 Product Fiche 54 USB Hard Drive - Format 15 USB Hard Drive - Install 15 USB Hard Drive Connection 15...