Download  Print this page

Connect Your Android Tv; Network And Internet - Philips 43PUS6401 User Manual

Hide thumbs

Advertisement

7
Connect your
Android TV
7.1

Network and Internet

Home Network
To enjoy the full capabilities of your Philips Android
TV, your TV must be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to Network
Wireless Connection
What You Need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the Connection
Wireless
To make a wireless connection...
1 - Press  , select All Settings and press OK.
2 - Select Wireless and Networks and
press  (right) to enter the menu.
3 - Select Wired or Wi-Fi > Connect to Network.
4 - Select Wireless.
5 - In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Add New
Network to enter the network name yourself.
6 - Depending on the type of router, enter your
encryption key - WEP, WPA or WPA2. If you entered
the encryption key for this network before, you can
select OK to make the connection immediately.
7 - A message will be shown when the connection is
successful.
Wi-Fi On/Off
Make sure Wi-Fi is switched on before you try to
make the connection...
1 - Press  , select All Settings and press OK.
2 - Select Wireless and Networks and
press  (right).
3 - Select Wired or Wi-Fi > Wi-Fi On/Off.
4 - If it is switched off, select On and press O.
WPS
If your router has WPS, you can directly connect to
the router without scanning for networks. If you have
devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
1 - Press  , select All Settings and press OK.
2 - Select Wireless and Networks and
press  (right) to enter the menu.
3 - Select Wired or Wi-Fi > Connect to Network.
4 - Select WPS.
5 - Go to the router, press the WPS button and return
to the TV within 2 minutes.
6 - Select Connect to make the connection.
7 - A message will be shown when the connection is
successful.
WPS with PIN Code
If your router has WPS with a PIN code, you can
directly connect to the router without scanning for
networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 - Press  , select All Settings and press OK.
2 - Select Wireless and Networks and
press  (right) to enter the menu.
3 - Select Wired or Wi-Fi > Connect to Network.
4 - Select WPS with PIN code.
5 - Write down the 8-digit PIN code shown on
screen and enter it in the router software on your PC.
Consult the router manual on where to enter the PIN
code in the router software.
6 - Select Connect to make the connection.
7 - A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
34

Advertisement

Table of Contents

   Also See for Philips 43PUS6401

   Related Manuals for Philips 43PUS6401

This manual is also suitable for:

55pus640149pus640132pfs6401

Comments to this Manuals

Symbols: 0
Latest comments: