Digital Equipment AlphaServer 1000 Installation Information

DIGITAL AlphaServer 1000 and DIGITAL AlphaStation 600 Rackmount Installation
Information
EK-RMALP-IN. F01
June, 1998
Introduction
This installation sheet gives the necessary information to install the rackmount kit for the DIGITAL AlphaServer
1000, DIGITAL AlphaServer 1000A, and DIGITAL AlphaStation 600. Basic knowledge of installing computer
systems is presumed.
For additional information, refer to the AlphaServer 1000 Rackmount Owner's Guide (EK-RMALP-OG), the
AlphaServer 1000A Rackmount Owner's Guide (EK-RMNOR-OG), or the AlphaStation 600 Series User
Information (EK-AS800-UI).
Preparing for Installation
Table 1 lists the parts of your AlphaServer 1000/AlphaServer 1000A/AlphaStation 600 rackmount kit. Ensure that
you have all the parts before you assemble the rackmount kit.
Table 1 Parts List
Part Description
1 Front bezel, Tower
2 System shelf, Tower
3 Locking bracket
4 Slide bracket, front right-hand (RH)
5 Slide bracket, front left-hand (LH)
6 Slide bracket, rear right-hand (RH)
7 Slide bracket, rear left-hand (LH)
8 Shipping bracket
9 Interlock actuator
10 Nut bar
11 Concealed pull
12 Pan head screw (10 mm)
13 Ball Stud #10-32
14 Keps nut #10-32
15 Truss head screw (0.5 in long)
16 Pan head screw (0.375 in long)
17 Flat washer
18 Helical split washer
19 Hex nut #8-32
© Digital Equipment Corporation. 1998. All Rights Reserved.
™ AlphaServer, AlphaStation, DIGITAL, and the DIGITAL logo are trademarks of Digital Equipment Corporation.
TM
Part Number Qty.
74-52719-01 1
74-52718-01 1
74-49530-01 1
74-49532-01 1
74-49532-02 1
74-49533-01 1
74-49533-02 1
74-49529-01 1
74-48999-16 1
74-49534-01 4
12-40436-02 1
90-40005-06 2
90-11337-01 2
90-06565-00 2
90-00063-39 3
90-00062-23 20
90-06661-00 20
90-06690-00 8
90-06561-00 8
S3722